The Sublimation Printing World: Sublimation Transfer Mug‘s Printing Progress With A 3D Vacuum Transfer Machine

Sunday, November 29, 2015

Sublimation Mug Transfer Machine with 11OZ NanJing Fei Yue Paper Industrial Co.,Ltd

The items needed : inkjet printer or Transfer Machine with sublimation inks installed, graphic art software like Adobe Illustrator or Coral Draw, sublimation paper, pair of scissors or art knife and a ruler, heat tape and a few blank sublimation mugs.
MATERIALS AVAILABLE: http://sublihouse.com/

Have a template. You can download one from our website here. This template is for an 11oz, 325ml mug. Diameter of the mug is 260mm. Print area is 70mm Wide x 90mm High on two sides of the mug.
Once you are happy with the position of you logo / logos you are ready to print your artwork. Generally for most good quality sublimation paper you don't require a lot of ink to be laid down on the sublimation paper.
Now adjust your pressure setting on your mug press so that when you clap your mug in the press it have medium to heavy pressure on it.
Now plug in your mug press and set the temperature for 400F / 204C and the timer for 180 seconds and let it preheat to the required temperature.
Once the time is up release the pressure off the press and remove the mug by the handle followed by picking the edge of one the the bits of heat tape on one end of the paper with your fingernail then peeling the paper off the mug in one smooth movement. (watch out its HOT!)
Now place you mug on a heat proof surface until it has cooled down enough to handle.